Update Rust crate reqwest to v0.13.5

Update actions-rust-lang/setup-rust-toolchain action to v2
Include Docker Compose example in installation guide (#262 )
2026-09-08 21:07:45 +00:00 · 2026-09-08 07:07:30 +03:00 · 2026-09-07 09:08:52 +03:00 · 2026-09-04 01:55:41 +00:00 · 2026-09-03 19:57:33 +00:00 · 2026-09-03 03:00:45 +00:00
19 changed files with 283 additions and 142 deletions
--- a/.github/workflows/ci.yml
+++ b/.github/workflows/ci.yml
@@ -22,7 +22,7 @@ jobs:

      # Toolchain version + components come from rust-toolchain.toml. rustflags is
      # cleared so plain builds don't fail on warnings; the clippy hook still does.
-      - uses: actions-rust-lang/setup-rust-toolchain@v1
+      - uses: actions-rust-lang/setup-rust-toolchain@v2
        with:
          rustflags: ''

@@ -42,3 +42,63 @@ jobs:

      - name: Unit tests
        run: just test
+
+  # The prek job never builds a container image, so a bump of the Dockerfile's
+  # base image reaches main unvalidated and fails later, in Publish, after
+  # ghcr.io/etkecc/baibot:latest has already been attempted. These two jobs close
+  # that gap: decide whether a Dockerfile changed, and if so build the image the
+  # way Publish does - but without pushing anything.
+  #
+  # The build is gated rather than unconditional because it is a full Rust
+  # release build; running it on every push would turn a ~1 minute pipeline into
+  # a ~10 minute one for changes that cannot affect the image.
+  docker-gate:
+    name: Decide whether the image needs building
+    runs-on: ubuntu-latest
+    outputs:
+      build: ${{ steps.decide.outputs.build }}
+    steps:
+      - uses: actions/checkout@v7
+        with:
+          fetch-depth: 0
+
+      - name: Look for Dockerfile changes against main
+        id: decide
+        run: |
+          if [ "${{ github.event_name }}" = 'workflow_dispatch' ]; then
+            echo 'Forced via workflow_dispatch.'
+            echo 'build=true' >> "$GITHUB_OUTPUT"
+            exit 0
+          fi
+
+          # Publish builds and pushes from main, so a main-side build here would
+          # be redundant. This gate exists for branches, before they merge.
+          if [ "${{ github.ref_name }}" = 'main' ]; then
+            echo 'On main; Publish covers this.'
+            echo 'build=false' >> "$GITHUB_OUTPUT"
+            exit 0
+          fi
+
+          git fetch --no-tags origin main
+          if git diff --name-only origin/main HEAD -- Dockerfile | grep -q .; then
+            echo 'A Dockerfile changed; the image will be built.'
+            echo 'build=true' >> "$GITHUB_OUTPUT"
+          else
+            echo 'No Dockerfile changed.'
+            echo 'build=false' >> "$GITHUB_OUTPUT"
+          fi
+
+  docker-build:
+    name: Build the container image (without publishing it)
+    needs: docker-gate
+    if: needs.docker-gate.outputs.build == 'true'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v7
+
+      # No build cache on purpose: a bump of the base image is exactly the case
+      # where a cold build is the honest test.
+      - name: Build
+        uses: docker/build-push-action@v7
+        with:
+          push: false
--- a/.pre-commit-config.yaml
+++ b/.pre-commit-config.yaml
@@ -5,6 +5,10 @@ repos:
      - id: trailing-whitespace
      - id: end-of-file-fixer
      - id: check-yaml
+        # This is the stock Synapse sample homeserver.yaml (mostly commented-out
+        # docs). prek's stricter YAML parser (serde-saphyr, since v0.4.6) rejects
+        # its long runs of consecutive comment lines in several places.
+        exclude: '^etc/services/synapse/config/homeserver\.yaml$'
      - id: check-merge-conflict
      - id: check-added-large-files
        args: ['--maxkb=1024']
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -1,4 +1,4 @@
-# (2026-06-28) Version 1.25.0
+# (2026-06-29) Version 1.25.0

 - (**Feature**) [♻️ Context management](./docs/configuration/text-generation.md#️-context-management) now works with every provider, not only [OpenAI](./docs/providers.md#openai). Token counting previously went through [tiktoken-rs](https://github.com/zurawiki/tiktoken-rs), which is accurate only for OpenAI models and silently mis-counted everything else (worst of all for non-English text). OpenAI agents keep using tiktoken-rs; every other provider, including the recommended [Venice](./docs/providers.md#venice), now uses a provider-neutral approximation that needs no per-model tokenizer (ASCII counted at about four characters per token, other scripts such as Cyrillic and CJK at about two), landing within roughly 10-20% of the real count. See the [context management docs](./docs/configuration/text-generation.md#️-context-management).

--- a/Cargo.lock
+++ b/Cargo.lock
@@ -95,9 +95,9 @@ dependencies = [

 [[package]]
 name = "anyhow"
-version = "1.0.103"
+version = "1.0.104"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "2a4385e2e34eb35d6b3efe798b9eb88096925d87726c0798709bf56d9ed84af3"
+checksum = "330a5ed07fa54e4702c9d6c4174f74427fc0ef6e214bbd677ae50a5099946470"

 [[package]]
 name = "anymap2"
@@ -184,9 +184,9 @@ checksum = "4288f83726785267c6f2ef073a3d83dc3f9b81464e9f99898240cced85fce35a"

 [[package]]
 name = "async-openai"
-version = "0.41.1"
+version = "0.41.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "3007014661d5b98168b7b6f1014147bce8b1362a194783543eeb9f6117a20be9"
+checksum = "d72db2750faea2ca5edbf6d0c50277a89dc8f75f5e6ddd695ef30f75e335019b"
 dependencies = [
 "async-openai-macros",
 "base64 0.22.1",
@@ -196,7 +196,7 @@ dependencies = [
 "futures",
 "getrandom 0.3.4",
 "rand 0.9.4",
- "reqwest 0.13.4",
+ "reqwest 0.13.5",
 "secrecy",
 "serde",
 "serde_json",
@@ -320,7 +320,7 @@ dependencies = [
 "anthropic",
 "anyhow",
 "async-openai",
- "base64 0.22.1",
+ "base64 0.23.1",
 "chrono",
 "etke_openai_api_rust",
 "matrix-sdk",
@@ -329,7 +329,7 @@ dependencies = [
 "mxlink",
 "quick_cache 0.7.0",
 "regex",
- "reqwest 0.13.4",
+ "reqwest 0.13.5",
 "serde",
 "serde_json",
 "serde_yaml_ng",
@@ -353,6 +353,12 @@ version = "0.22.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "72b3254f16251a8381aa12e40e3c4d2f0199f8c6508fbecb9d91f575e0fbb8c6"

+[[package]]
+name = "base64"
+version = "0.23.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "ac07cdecf99051d9a5238b80f35af32cdeba5b336e55d957b318b50137e18da5"
+
 [[package]]
 name = "base64ct"
 version = "1.8.3"
@@ -2188,7 +2194,7 @@ dependencies = [
 "oauth2-reqwest",
 "percent-encoding",
 "pin-project-lite",
- "reqwest 0.13.4",
+ "reqwest 0.13.5",
 "ruma",
 "rustls",
 "rustls-native-certs 0.8.3",
@@ -2480,9 +2486,9 @@ dependencies = [

 [[package]]
 name = "mxidwc"
-version = "1.0.2"
+version = "1.0.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5e253f96a03d24d1c0006c5661b1e20a13dc3861f509d76c33b6b44349d4ff3b"
+checksum = "45b5d51fcf414d2aa6bffc6cd9b037e62732734a944c5da4ace6b9895ec37b93"
 dependencies = [
 "regex",
 ]
@@ -2583,7 +2589,7 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "234fb5c965bbce983ee5de636a7a51d6a3223da8067ea02f9ab2d2d78ac08be2"
 dependencies = [
 "oauth2",
- "reqwest 0.13.4",
+ "reqwest 0.13.5",
 ]

 [[package]]
@@ -3064,9 +3070,9 @@ dependencies = [

 [[package]]
 name = "regex"
-version = "1.12.4"
+version = "1.13.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f1292b7759ae1cb9ec195452d1390a074f0cd8541ab7a5a8c31cd6db45d4a6ba"
+checksum = "f020237b6c8eed93db2e2cb53c00c60a8e1bc73da7d073199a1180401450218d"
 dependencies = [
 "aho-corasick",
 "memchr",
@@ -3076,9 +3082,9 @@ dependencies = [

 [[package]]
 name = "regex-automata"
-version = "0.4.14"
+version = "0.4.16"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "6e1dd4122fc1595e8162618945476892eefca7b88c52820e74af6262213cae8f"
+checksum = "8fcfdb36bda0c880c5931cdc7a2bcdc8ba4556847b9d912bca70bc94708711ad"
 dependencies = [
 "aho-corasick",
 "memchr",
@@ -3134,11 +3140,11 @@ dependencies = [

 [[package]]
 name = "reqwest"
-version = "0.13.4"
+version = "0.13.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "219c5811de6525e5416c7d5d53bb656d3afdbc6c5af816e0802bcfa42dbdc1c3"
+checksum = "16a1cfa75cc186dd73d5818e510e042e40927bccc9c236b061cea97e1eb08029"
 dependencies = [
- "base64 0.22.1",
+ "base64 0.23.1",
 "bytes",
 "futures-core",
 "futures-util",
@@ -3611,9 +3617,9 @@ checksum = "8a7852d02fc848982e0c167ef163aaff9cd91dc640ba85e263cb1ce46fae51cd"

 [[package]]
 name = "serde"
-version = "1.0.228"
+version = "1.0.229"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9a8e94ea7f378bd32cbbd37198a4a91436180c5bb472411e48b5ec2e2124ae9e"
+checksum = "4148590afebada386688f18773da617792bf2ef03ffc1e4cbd2b1d45b023e0ba"
 dependencies = [
 "serde_core",
 "serde_derive",
@@ -3642,22 +3648,22 @@ dependencies = [

 [[package]]
 name = "serde_core"
-version = "1.0.228"
+version = "1.0.229"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "41d385c7d4ca58e59fc732af25c3983b67ac852c1a25000afe1175de458b67ad"
+checksum = "67dca2c9c51e58a4791a4b1ed58308b39c64224d349a935ab5039aa360942a48"
 dependencies = [
 "serde_derive",
 ]

 [[package]]
 name = "serde_derive"
-version = "1.0.228"
+version = "1.0.229"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d540f220d3187173da220f885ab66608367b6574e925011a9353e4badda91d79"
+checksum = "e7a5d71263a5a7d47b41f6b3f06ba276f10cc18b0931f1799f710578e2309348"
 dependencies = [
 "proc-macro2",
 "quote",
- "syn 2.0.117",
+ "syn 3.0.0",
 ]

 [[package]]
@@ -3675,9 +3681,9 @@ dependencies = [

 [[package]]
 name = "serde_json"
-version = "1.0.150"
+version = "1.0.151"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e8014e44b4736ed0538adeecded0fce2a272f22dc9578a7eb6b2d9993c74cfb9"
+checksum = "c841b55ecdae098c80dcae9cf767f6f8a0c2cdb3416bbef72181df4d0fe73f14"
 dependencies = [
 "itoa",
 "memchr",
@@ -3899,6 +3905,17 @@ dependencies = [
 "unicode-ident",
 ]

+[[package]]
+name = "syn"
+version = "3.0.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "f2fac314a64dc9a36e61a9eb4261a5e9bbfbc922b27e518af97bc32b926cf967"
+dependencies = [
+ "proc-macro2",
+ "quote",
+ "unicode-ident",
+]
+
 [[package]]
 name = "sync_wrapper"
 version = "1.0.2"
@@ -4064,9 +4081,9 @@ checksum = "1f3ccbac311fea05f86f61904b462b55fb3df8837a366dfc601a0161d0532f20"

 [[package]]
 name = "tokio"
-version = "1.52.3"
+version = "1.53.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8fc7f01b389ac15039e4dc9531aa973a135d7a4135281b12d7c1bc79fd57fffe"
+checksum = "202caea871b69668250d242070849eb495be178ed697a3e98aebce5bc81a0bed"
 dependencies = [
 "bytes",
 "libc",
--- a/Cargo.toml
+++ b/Cargo.toml
@@ -18,7 +18,7 @@ path = "src/lib.rs"
 anthropic = { git = "https://github.com/etkecc/anthropic-rs.git", branch = "fix-content-block-image" }
 anyhow = "1.0.*"
 async-openai = { version = "0.41.0", features = ["audio", "chat-completion", "image", "responses"] }
-base64 = "0.22.*"
+base64 = "0.23.*"
 chrono = { version = "0.4.*", default-features = false, features = ["std", "now"] }
 # We'd rather not depend on this, but we cannot use the ruma-events EventContent macro without it.
 matrix-sdk = { version = "0.18.0", default-features = false }
@@ -27,7 +27,7 @@ mxidwc = "1.0.*"
 mxlink = ">=1.15.0"
 etke_openai_api_rust = "0.1.*"
 quick_cache = "0.7.*"
-regex = "1.12.*"
+regex = "1.13.*"
 # HTTP client for the native `venice` provider. rustls only (no extra TLS stack), matching the
 # reqwest copy async-openai/matrix-sdk/mxlink already use.
 reqwest = { version = "0.13.*", default-features = false, features = ["json", "multipart", "rustls"] }
@@ -36,7 +36,7 @@ serde_json = "1.0.*"
 serde_yaml_ng = "0.10.*"
 tempfile = "3.27.*"
 tiktoken-rs = { version = "0.12.*", default-features = false }
-tokio = { version = "1.52.*", features = ["rt", "rt-multi-thread", "macros"] }
+tokio = { version = "1.53.*", features = ["rt", "rt-multi-thread", "macros"] }
 tracing = "0.1.*"
 tracing-subscriber = { version = "0.3.*", features = ["env-filter"] }
 url = "2.5.*"
--- a/2
+++ b/2
@@ -4,7 +4,7 @@
 #                                     #
 #######################################

-FROM docker.io/rust:1.96.0-slim-trixie AS build
+FROM docker.io/rust:1.98.0-slim-trixie AS build

 RUN apt-get update && apt-get install -y build-essential pkg-config libssl-dev libsqlite3-dev

--- a/Dockerfile.ci
+++ b/Dockerfile.ci
@@ -1,35 +0,0 @@
-#######################################
-#                                     #
-# Stage 1: building                   #
-#                                     #
-#######################################
-
-FROM docker.io/rust:1.96.0-slim-trixie AS build
-
-RUN apt-get update && apt-get install -y build-essential pkg-config libssl-dev libsqlite3-dev
-
-WORKDIR /app
-
-COPY . /app
-
-RUN cargo build --release
-
-#######################################
-#                                     #
-# Stage 2: packaging                  #
-#                                     #
-#######################################
-
-FROM docker.io/debian:trixie-slim
-
-RUN apt-get update && apt-get install -y ca-certificates sqlite3 && \
-    apt-get clean && \
-    rm -rf /var/lib/apt/lists/*
-
-WORKDIR /app
-
-COPY --from=build /app/target/release/baibot .
-
-ENTRYPOINT ["/bin/sh", "-c"]
-
-CMD ["/app/baibot"]
--- a/docs/installation.md
+++ b/docs/installation.md
@@ -57,6 +57,34 @@ CONTAINER_IMAGE_NAME=ghcr.io/etkecc/baibot:v1.0.0
  $CONTAINER_IMAGE_NAME
 ```

+Alternatively, you can use [Docker Compose](https://docs.docker.com/compose/) with a `compose.yml` file like this:
+
+```yaml
+services:
+  baibot:
+    container_name: baibot
+    # Adjust the version tag to point to the latest available tagged version.
+    # If building your own container image name, adjust to something like `localhost/baibot:latest`.
+    image: ghcr.io/etkecc/baibot:v1.0.0
+    # Set `UID` and `GID` in a `.env` file next to `compose.yml` (e.g. `UID=1000`, `GID=1000`)
+    # or export them in your shell (`export UID GID="$(id -g)"`).
+    # These should match the user that owns the data directory.
+    user: "${UID:-1000}:${GID:-1000}"
+    environment:
+      # Other settings can also be set via environment variables.
+      # See the 🛠️ Configuration documentation (docs/configuration/README.md) for details.
+      BAIBOT_PERSISTENCE_DATA_DIR_PATH: /data
+    volumes:
+      - /path/to/config.yml:/app/config.yml:ro
+      - /path/to/data:/data
+    cap_drop:
+      - ALL
+    read_only: true
+    tmpfs:
+      - /tmp:rw,noexec,nosuid,size=1024m
+    restart: unless-stopped
+```
+
 💡 If you've defined the `persistence.data_dir_path` setting in the `config.yml` file, you can skip the `BAIBOT_PERSISTENCE_DATA_DIR_PATH` environment variable.


--- a/etc/services/continuwuity/compose.yml
+++ b/etc/services/continuwuity/compose.yml
@@ -1,14 +1,14 @@
 services:
  continuwuity:
-    image: forgejo.ellis.link/continuwuation/continuwuity:v0.5.10
+    image: forgejo.ellis.link/continuwuation/continuwuity:v26.8.1
    user: "${UID}:${GID}"
    restart: unless-stopped
    cap_drop:
      - ALL
    read_only: true
    environment:
-      CONDUWUIT_CONFIG: /etc/continuwuity/continuwuity.toml
-      CONDUWUIT_DATABASE_PATH: /var/lib/continuwuity
+      CONTINUWUITY_CONFIG: /etc/continuwuity/continuwuity.toml
+      CONTINUWUITY_DATABASE_PATH: /var/lib/continuwuity
    ports:
      - "${SERVICE_CONTINUWUITY_BIND_PORT_CLIENT_API}:6167"
    volumes:
--- a/etc/services/element-web/compose.yml
+++ b/etc/services/element-web/compose.yml
@@ -1,6 +1,6 @@
 services:
  element-web:
-    image: ghcr.io/element-hq/element-web:v1.12.22
+    image: ghcr.io/element-hq/element-web:v1.12.27
    user: "${UID}:${GID}"
    restart: unless-stopped
    environment:
--- a/etc/services/ollama/compose.yml
+++ b/etc/services/ollama/compose.yml
@@ -1,6 +1,6 @@
 services:
  ollama:
-    image: docker.io/ollama/ollama:0.30.11
+    image: docker.io/ollama/ollama:0.33.3
    restart: unless-stopped
    ports:
      - "${SERVICE_OLLAMA_BIND_PORT_HTTP}:11434"
--- a/etc/services/synapse/compose.yml
+++ b/etc/services/synapse/compose.yml
@@ -1,6 +1,6 @@
 services:
  postgres:
-    image: docker.io/postgres:18.4-alpine
+    image: docker.io/postgres:18.6-alpine
    user: ${UID}:${GID}
    restart: unless-stopped
    environment:
@@ -14,7 +14,7 @@ services:
    - /etc/passwd:/etc/passwd:ro

  synapse:
-    image: ghcr.io/element-hq/synapse:v1.155.0
+    image: ghcr.io/element-hq/synapse:v1.160.0
    user: "${UID}:${GID}"
    restart: unless-stopped
    entrypoint: python
--- a/24
+++ b/24
@@ -271,7 +271,29 @@ prek-run-on-all *args: _ensure_mise_tools_installed

 # Installs the git pre-commit hook (runs prek automatically before each commit)
 prek-install-git-pre-commit-hook: _ensure_mise_tools_installed
-	@just --justfile {{ justfile() }} mise exec -- prek install
+	#!/usr/bin/env sh
+	set -eu
+	just --justfile {{ justfile() }} mise exec -- prek install
+	# The installed git hooks run later under Git, outside this just/mise environment,
+	# so they need to be told how to find their tooling:
+	#
+	# - MISE_DATA_DIR / MISE_TRUSTED_CONFIG_PATHS make mise resolve against this project's
+	#   own data directory. Without them mise falls back to the global one and silently
+	#   installs a second copy of the tool there.
+	# - prek bakes the full path of the currently installed version into the hook
+	#   (var/mise/installs/prek/<version>/...), which stops working as soon as the pinned
+	#   version changes or old versions are pruned. Pointing at mise's shim instead makes
+	#   the hook resolve whatever mise.toml pins, at the time it runs.
+	#
+	# Which hook files prek installs depends on `default_install_hook_types` in
+	# .pre-commit-config.yaml, so patch every hook file that prek generated.
+	for hook in "{{ justfile_directory() }}"/.git/hooks/*; do
+		[ -f "$hook" ] || continue
+		grep -q 'generated by prek' "$hook" || continue
+		grep -q '^export MISE_DATA_DIR=' "$hook" || sed -i '2iexport MISE_DATA_DIR="{{ mise_data_dir }}"' "$hook"
+		grep -q '^export MISE_TRUSTED_CONFIG_PATHS=' "$hook" || sed -i '3iexport MISE_TRUSTED_CONFIG_PATHS="{{ mise_trusted_config_paths }}"' "$hook"
+		sed -i 's#^PREK=".*"$#PREK="{{ mise_data_dir }}/shims/prek"#' "$hook"
+	done

 # Internal - ensures var/mise directory exists
 _ensure_mise_data_directory:
--- a/mise.toml
+++ b/mise.toml
@@ -1,6 +1,2 @@
 [tools]
-prek = "0.4.5"
-
-[settings]
-# Disable automatic trust prompts - we trust this config
-yes = true
+prek = "0.5.2"
--- a/renovate.json
+++ b/renovate.json
@@ -5,5 +5,62 @@
 	],
 	"labels": [
 		"dependencies"
+	],
+	"packageRules": [
+		{
+			"description": "Cargo dependencies, the Rust toolchain pin, prek (via mise) and the workflows' own actions merge by pushing to main, without a pull request. ci.yml runs on `push: [\"**\"]`, so the Renovate branch itself is compiled, linted with `clippy -D warnings` and unit-tested first; a failure leaves the branch red and Renovate raises a pull request instead of merging.",
+			"matchManagers": [
+				"cargo",
+				"rust-toolchain",
+				"mise",
+				"github-actions"
+			],
+			"matchUpdateTypes": [
+				"minor",
+				"patch",
+				"digest"
+			],
+			"automerge": true,
+			"automergeType": "branch",
+			"platformAutomerge": false
+		},
+		{
+			"description": "The release image's base (Dockerfile). Gated by ci.yml's docker-build job, which builds the image exactly as Publish does but with `push: false`, and which only runs when the Dockerfile actually changed.",
+			"matchManagers": [
+				"dockerfile"
+			],
+			"matchUpdateTypes": [
+				"minor",
+				"patch",
+				"digest"
+			],
+			"automerge": true,
+			"automergeType": "branch",
+			"platformAutomerge": false
+		},
+		{
+			"description": "Local development service images under etc/services/** - the homeservers and LLM backends that `just services-start` brings up. They are never part of a shipped artifact and CI does not run them, so the justification here is blast radius rather than validation: the worst case is a broken local development stack, fixed by pinning back.",
+			"matchManagers": [
+				"docker-compose"
+			],
+			"matchFileNames": [
+				"etc/services/**"
+			],
+			"matchUpdateTypes": [
+				"minor",
+				"patch",
+				"digest"
+			],
+			"automerge": true,
+			"automergeType": "branch",
+			"platformAutomerge": false
+		},
+		{
+			"description": "Major updates always get a pull request and a human. This is deliberately the last rule so that it overrides the automerge rules above for every manager.",
+			"matchUpdateTypes": [
+				"major"
+			],
+			"automerge": false
+		}
 	]
 }
--- a/rust-toolchain.toml
+++ b/rust-toolchain.toml
@@ -1,4 +1,4 @@
 [toolchain]
-channel = "1.96.0"
+channel = "1.98.1"
 components = ["rustfmt", "clippy"]
 profile = "default"
--- a/src/controller/cfg/help.rs
+++ b/src/controller/cfg/help.rs
@@ -136,7 +136,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(
+        strings::help::cfg::current_setting_show(
            command_prefix,
            "text-generation prefix-requirement-type"
        )
@@ -144,7 +144,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "text-generation set-prefix-requirement-type VALUE"
        )
@@ -152,7 +152,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(
+        strings::help::cfg::current_setting_unset(
            command_prefix,
            "text-generation set-prefix-requirement-type"
        )
@@ -176,12 +176,12 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push_str("\n\n");
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(command_prefix, "text-generation auto-usage")
+        strings::help::cfg::current_setting_show(command_prefix, "text-generation auto-usage")
    ));
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "text-generation set-auto-usage VALUE"
        )
@@ -189,10 +189,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(
-            command_prefix,
-            "text-generation set-auto-usage"
-        )
+        strings::help::cfg::current_setting_unset(command_prefix, "text-generation set-auto-usage")
    ));
    message.push_str("\n\n");

@@ -211,7 +208,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push_str("\n\n");
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(
+        strings::help::cfg::current_setting_show(
            command_prefix,
            "text-generation context-management-enabled"
        )
@@ -219,7 +216,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "text-generation set-context-management-enabled VALUE"
        )
@@ -227,7 +224,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(
+        strings::help::cfg::current_setting_unset(
            command_prefix,
            "text-generation set-context-management-enabled"
        )
@@ -249,7 +246,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push_str("\n\n");
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(
+        strings::help::cfg::current_setting_show(
            command_prefix,
            "text-generation thinking-notice-enabled"
        )
@@ -257,7 +254,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "text-generation set-thinking-notice-enabled VALUE"
        )
@@ -265,7 +262,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(
+        strings::help::cfg::current_setting_unset(
            command_prefix,
            "text-generation set-thinking-notice-enabled"
        )
@@ -289,7 +286,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push_str("\n\n");
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(
+        strings::help::cfg::current_setting_show(
            command_prefix,
            "text-generation sender-context-mode"
        )
@@ -297,7 +294,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "text-generation set-sender-context-mode VALUE"
        )
@@ -305,7 +302,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(
+        strings::help::cfg::current_setting_unset(
            command_prefix,
            "text-generation set-sender-context-mode"
        )
@@ -323,15 +320,12 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push_str("\n\n");
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(
-            command_prefix,
-            "text-generation prompt-override"
-        )
+        strings::help::cfg::current_setting_show(command_prefix, "text-generation prompt-override")
    ));
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "text-generation set-prompt-override VALUE"
        )
@@ -339,7 +333,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(
+        strings::help::cfg::current_setting_unset(
            command_prefix,
            "text-generation set-prompt-override"
        )
@@ -357,7 +351,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push_str("\n\n");
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(
+        strings::help::cfg::current_setting_show(
            command_prefix,
            "text-generation temperature-override"
        )
@@ -365,7 +359,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "text-generation set-temperature-override VALUE"
        )
@@ -373,7 +367,7 @@ fn build_section_text_generation(command_prefix: &str, bot_username: &str) -> St
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(
+        strings::help::cfg::current_setting_unset(
            command_prefix,
            "text-generation set-temperature-override"
        )
@@ -410,12 +404,12 @@ fn build_section_speech_to_text(command_prefix: &str) -> String {
    message.push_str("\n\n");
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(command_prefix, "speech-to-text flow-type")
+        strings::help::cfg::current_setting_show(command_prefix, "speech-to-text flow-type")
    ));
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "speech-to-text set-flow-type VALUE"
        )
@@ -423,7 +417,7 @@ fn build_section_speech_to_text(command_prefix: &str) -> String {
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(command_prefix, "speech-to-text set-flow-type")
+        strings::help::cfg::current_setting_unset(command_prefix, "speech-to-text set-flow-type")
    ));
    message.push_str("\n\n");

@@ -444,7 +438,7 @@ fn build_section_speech_to_text(command_prefix: &str) -> String {
    message.push_str("\n\n");
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(
+        strings::help::cfg::current_setting_show(
            command_prefix,
            "speech-to-text msg-type-for-non-threaded-only-transcribed-messages"
        )
@@ -452,7 +446,7 @@ fn build_section_speech_to_text(command_prefix: &str) -> String {
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "speech-to-text set-msg-type-for-non-threaded-only-transcribed-messages VALUE"
        )
@@ -460,7 +454,7 @@ fn build_section_speech_to_text(command_prefix: &str) -> String {
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(
+        strings::help::cfg::current_setting_unset(
            command_prefix,
            "speech-to-text set-msg-type-for-non-threaded-only-transcribed-messages"
        )
@@ -478,12 +472,12 @@ fn build_section_speech_to_text(command_prefix: &str) -> String {
    message.push_str("\n\n");
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(command_prefix, "speech-to-text language")
+        strings::help::cfg::current_setting_show(command_prefix, "speech-to-text language")
    ));
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "speech-to-text set-language VALUE"
        )
@@ -491,7 +485,7 @@ fn build_section_speech_to_text(command_prefix: &str) -> String {
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(command_prefix, "speech-to-text set-language")
+        strings::help::cfg::current_setting_unset(command_prefix, "speech-to-text set-language")
    ));
    message.push_str("\n\n");

@@ -526,7 +520,7 @@ fn build_section_text_to_speech(command_prefix: &str) -> String {
    message.push_str("\n\n");
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(
+        strings::help::cfg::current_setting_show(
            command_prefix,
            "text-to-speech bot-msgs-flow-type"
        )
@@ -534,7 +528,7 @@ fn build_section_text_to_speech(command_prefix: &str) -> String {
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "text-to-speech set-bot-msgs-flow-type VALUE"
        )
@@ -542,7 +536,7 @@ fn build_section_text_to_speech(command_prefix: &str) -> String {
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(
+        strings::help::cfg::current_setting_unset(
            command_prefix,
            "text-to-speech set-bot-msgs-flow-type"
        )
@@ -566,7 +560,7 @@ fn build_section_text_to_speech(command_prefix: &str) -> String {
    message.push_str("\n\n");
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(
+        strings::help::cfg::current_setting_show(
            command_prefix,
            "text-to-speech user-msgs-flow-type"
        )
@@ -574,7 +568,7 @@ fn build_section_text_to_speech(command_prefix: &str) -> String {
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "text-to-speech set-user-msgs-flow-type VALUE"
        )
@@ -582,7 +576,7 @@ fn build_section_text_to_speech(command_prefix: &str) -> String {
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(
+        strings::help::cfg::current_setting_unset(
            command_prefix,
            "text-to-speech set-user-msgs-flow-type"
        )
@@ -600,12 +594,12 @@ fn build_section_text_to_speech(command_prefix: &str) -> String {
    message.push_str("\n\n");
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(command_prefix, "text-to-speech speed-override")
+        strings::help::cfg::current_setting_show(command_prefix, "text-to-speech speed-override")
    ));
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "text-to-speech set-speed-override VALUE"
        )
@@ -613,7 +607,7 @@ fn build_section_text_to_speech(command_prefix: &str) -> String {
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(
+        strings::help::cfg::current_setting_unset(
            command_prefix,
            "text-to-speech set-speed-override"
        )
@@ -631,12 +625,12 @@ fn build_section_text_to_speech(command_prefix: &str) -> String {
    message.push_str("\n\n");
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_show(command_prefix, "text-to-speech voice-override")
+        strings::help::cfg::current_setting_show(command_prefix, "text-to-speech voice-override")
    ));
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_set(
+        strings::help::cfg::current_setting_set(
            command_prefix,
            "text-to-speech set-voice-override VALUE"
        )
@@ -644,7 +638,7 @@ fn build_section_text_to_speech(command_prefix: &str) -> String {
    message.push('\n');
    message.push_str(&format!(
        "- {}",
-        &strings::help::cfg::current_setting_unset(
+        strings::help::cfg::current_setting_unset(
            command_prefix,
            "text-to-speech set-voice-override"
        )
--- a/src/controller/chat_completion/mod.rs
+++ b/src/controller/chat_completion/mod.rs
@@ -147,9 +147,7 @@ pub async fn handle(
        // Let's proceed below where we potentially handle text-generation.
    }

-    let text_to_speech_stage_params: Option<TextToSpeechParams>;
-
-    if message_context
+    let text_to_speech_stage_params: Option<TextToSpeechParams> = if message_context
        .room_config_context()
        .should_auto_text_generate(original_message_is_audio)
    {
@@ -210,7 +208,7 @@ pub async fn handle(
            return Ok(());
        };

-        text_to_speech_stage_params = match message_context
+        match message_context
            .room_config_context()
            .text_to_speech_bot_messages_flow_type()
        {
@@ -243,7 +241,7 @@ pub async fn handle(
                text_to_speech_eligible_payload,
                response_type,
            )),
-        };
+        }
    } else {
        tracing::debug!("Not generating text due to auto-usage configuration");

@@ -262,7 +260,7 @@ pub async fn handle(
            event_id: message_context.event_id().clone(),
        };

-        text_to_speech_stage_params = match message_context
+        match message_context
            .room_config_context()
            .text_to_speech_user_messages_flow_type()
        {
@@ -275,8 +273,8 @@ pub async fn handle(
                text_to_speech_eligible_payload,
                response_type,
            )),
-        };
-    }
+        }
+    };

    // We're potentially dealing with some text in text_to_speech_eligible_payload - either coming directly from the user or generated by an agent.

--- a/src/strings/agent.rs
+++ b/src/strings/agent.rs
@@ -101,13 +101,13 @@ pub fn post_creation_helpful_commands(
        for purpose in supported_purposes {
            message.push_str(&format!(
                "\n- {}",
-                &set_as_purpose_handler_in_room(agent_identifier, purpose, command_prefix,)
+                set_as_purpose_handler_in_room(agent_identifier, purpose, command_prefix,)
            ));

            if !is_room_local {
                message.push_str(&format!(
                    "\n- {}",
-                    &set_as_purpose_handler_globally(agent_identifier, purpose, command_prefix,)
+                    set_as_purpose_handler_globally(agent_identifier, purpose, command_prefix,)
                ));
            }
        }
Author	SHA1	Message	Date
renovate[bot]	072fe3ec9f	Update Rust crate reqwest to v0.13.5	2026-09-08 21:07:45 +00:00
renovate[bot]	0d7ae70d1d	Update actions-rust-lang/setup-rust-toolchain action to v2	2026-09-08 07:07:30 +03:00
daru	f912162c4d	Include Docker Compose example in installation guide (#262 ) Adds a Docker Compose example alongside the existing `docker run` one, using a tagged release and the same hardening options. Co-authored-by: daru <darupeter@pm.me> Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Nh4Z2JCU4aVC5STFN7usfW	2026-09-07 09:08:52 +03:00
renovate[bot]	264f71d885	Update Rust to v1.98.1	2026-09-04 01:55:41 +00:00
renovate[bot]	2861ea6141	Update docker.io/ollama/ollama Docker tag to v0.33.3	2026-09-03 19:57:33 +00:00
renovate[bot]	2014e25f77	Update ghcr.io/element-hq/synapse Docker tag to v1.160.0	2026-09-03 03:00:45 +00:00
renovate[bot]	b5c5fdb357	Update dependency prek to v0.5.2	2026-09-02 21:32:26 +00:00
renovate[bot]	5ee8d18439	Update ghcr.io/element-hq/element-web Docker tag to v1.12.27	2026-09-01 18:48:07 +00:00
renovate[bot]	194a47bfc6	Update dependency prek to v0.5.1	2026-09-01 10:01:11 +00:00
renovate[bot]	4f3a753f52	Update docker.io/ollama/ollama Docker tag to v0.33.2	2026-08-28 22:07:30 +00:00
renovate[bot]	1a7b194588	Update dependency prek to v0.5.0	2026-08-27 08:33:23 +00:00
renovate[bot]	616607433f	Update docker.io/ollama/ollama Docker tag to v0.33.1	2026-08-27 02:54:32 +00:00
renovate[bot]	f1043e03de	Update docker.io/ollama/ollama Docker tag to v0.33.0	2026-08-26 01:57:04 +00:00
Slavi Pantaleev	6f3132edfd	justfile: git hooks resolve prek through the mise shim prek bakes the full path of the currently installed version into the hooks it generates (var/mise/installs/prek/<version>/...). That path stops existing as soon as the pinned version changes or old versions are pruned, and the hook's PATH fallback finds no prek either, so every commit fails until the hook is regenerated by hand. It also means a hook keeps running the version it was generated with, long after mise.toml has moved on. Rewriting PREK to mise's shim makes the hook resolve whatever mise.toml pins at the time it runs. The accompanying MISE_DATA_DIR / MISE_TRUSTED_CONFIG_PATHS exports keep that resolution inside this project - without them mise falls back to the global data directory and silently installs a second copy of the tool. The recipe becomes a shebang recipe, because just runs each line of a plain recipe in its own shell and the patch loop needs to span several lines. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-25 16:37:53 +03:00
renovate[bot]	4f86a321e2	Update forgejo.ellis.link/continuwuation/continuwuity Docker tag to v26.8.1 (#261 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-08-25 12:44:12 +00:00
Slavi Pantaleev	9d876a58a8	Drop Dockerfile.ci, which nothing has built since 2025 It was added in `941e5f0` (2024-09-21) as a cache-less variant, because the BuildKit cache mounts in the main Dockerfile were causing trouble in CI, and the workflow pointed at it with `file: Dockerfile.ci`. That line was removed in `6719538` (2025-02-27, "Switch to using native ARM64 builders"), which returned the build to the default Dockerfile - but the file itself stayed behind. Nothing has referenced it since. It had meanwhile drifted from the real Dockerfile (no RELEASE_BUILD argument, no cache mounts) while Renovate kept bumping its base image pin, so every one of those bumps was a pull request for a file that is never built. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-08-25 09:26:29 +03:00
Slavi Pantaleev	dfb2288fa3	Renovate: merge routine updates by pushing, without pull requests ci.yml runs on `push: [""]`, so a Renovate branch is already compiled, linted with `clippy -D warnings` and unit-tested before anything reaches main; a red branch makes Renovate open a pull request instead of merging. That gate now covers the Dockerfile base too, via the build job added in the previous commit. Cargo, the Rust toolchain, prek and the workflows' own actions therefore merge by branch push. The local development images under etc/services/ do too, on a different justification recorded in the rule itself: CI does not run them and they reach no shipped artifact, so the worst case is a broken `just services-start`. Majors keep their pull request - the rule is deliberately last, so it overrides the others for every manager. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-08-25 09:25:10 +03:00
Slavi Pantaleev	24d99627ae	CI: build the container image when a Dockerfile changes The prek job never builds an image, so a bump of the Dockerfile's base image reached main unvalidated and only failed afterwards in Publish - by which point ghcr.io/etkecc/baibot:latest had already been attempted. Add a gate job that looks for Dockerfile changes against main, and a build job that builds the image the way Publish does but with `push: false`. The build is gated rather than unconditional because it is a full Rust release build: running it on every push would turn a ~1 minute pipeline into a ~10 minute one for changes that cannot affect the image. It is skipped on main, where Publish already builds. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-08-25 09:25:10 +03:00
renovate[bot]	f7c88fe532	Update docker.io/rust Docker tag to v1.98.0 (#260 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-08-21 01:58:56 +03:00
Slavi Pantaleev	f25d50c7f2	Update Rust to v1.98.0 Fixes a new clippy lint (needless_late_init) by turning the text_to_speech_stage_params if/else into an expression. Supersedes https://github.com/etkecc/baibot/pull/259 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-21 01:58:26 +03:00
renovate[bot]	f22ac1636f	Update docker.io/ollama/ollama Docker tag to v0.32.15	2026-08-20 08:29:41 +03:00
renovate[bot]	43904e5032	Update ghcr.io/element-hq/synapse Docker tag to v1.159.0	2026-08-19 08:14:15 +03:00
renovate[bot]	4e29d2200f	Update ghcr.io/element-hq/element-web Docker tag to v1.12.26	2026-08-18 19:37:12 +03:00
renovate[bot]	30fe2a8a8c	Update dependency prek to v0.4.14	2026-08-17 10:07:29 +03:00
renovate[bot]	e59e88f12e	Update docker.io/ollama/ollama Docker tag to v0.32.14	2026-08-17 00:41:52 +03:00
Slavi Pantaleev	f27d8cfdcf	mise: drop the settings block - `yes` is ignored in project configs Since mise 2026.6.4 (advisory GHSA-436v-8fw5-4mj8), trust-control settings (`yes`, `ci`, `trusted_config_paths`, `paranoid`) in non-global configs are ignored, and every mise invocation prints a warning about this one. Removing it changes nothing on current mise - the setting was already dead. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-08-16 09:14:50 +03:00
renovate[bot]	909c5215d0	Update docker.io/ollama/ollama Docker tag to v0.32.13	2026-08-15 05:47:45 +03:00
renovate[bot]	ca1147c10a	Update docker.io/postgres Docker tag to v18.6	2026-08-14 07:08:00 +03:00
renovate[bot]	4a4e6c1090	Update docker.io/ollama/ollama Docker tag to v0.32.11	2026-08-14 07:07:35 +03:00
renovate[bot]	ea3af62afc	Update docker.io/ollama/ollama Docker tag to v0.32.10	2026-08-14 06:59:04 +03:00
renovate[bot]	ee7ffc8970	Update docker.io/ollama/ollama Docker tag to v0.32.9	2026-08-12 07:55:38 +03:00
renovate[bot]	45f5b7a1b0	Update forgejo.ellis.link/continuwuation/continuwuity Docker tag to v26.7.3	2026-08-12 07:55:29 +03:00
renovate[bot]	6d0396270e	Update dependency prek to v0.4.13	2026-08-10 16:02:29 +03:00
renovate[bot]	d52a5ea0ac	Update docker.io/ollama/ollama Docker tag to v0.32.6	2026-08-06 07:03:58 +03:00
renovate[bot]	30985baf0c	Update ghcr.io/element-hq/element-web Docker tag to v1.12.25	2026-08-05 14:02:42 +03:00
renovate[bot]	077a86e5c9	Update ghcr.io/element-hq/synapse Docker tag to v1.158.0	2026-08-05 05:08:48 +03:00
renovate[bot]	9b3d5400ff	Update Rust crate base64 to v0.23.1	2026-08-04 21:54:00 +03:00
renovate[bot]	721abe8c75	Update dependency prek to v0.4.12	2026-08-03 17:10:23 +03:00
renovate[bot]	dae5fec4c3	Update Rust crate async-openai to v0.41.3	2026-08-01 00:58:42 +03:00
renovate[bot]	8b3644f3db	Update Rust crate async-openai to v0.41.2	2026-07-31 06:30:40 +03:00
renovate[bot]	570a4be83c	Update forgejo.ellis.link/continuwuation/continuwuity Docker tag to v26.7.2	2026-07-31 06:30:09 +03:00
renovate[bot]	24266a4886	Update ghcr.io/element-hq/synapse Docker tag to v1.157.2	2026-07-28 23:15:01 +03:00
renovate[bot]	be94441ddb	Update docker.io/ollama/ollama Docker tag to v0.32.5	2026-07-28 07:17:04 +03:00
renovate[bot]	a4280eb8c0	Update forgejo.ellis.link/continuwuation/continuwuity Docker tag to v26.7.1	2026-07-28 07:16:08 +03:00
renovate[bot]	9ad9a04040	Update docker.io/ollama/ollama Docker tag to v0.32.4	2026-07-26 00:56:04 +03:00
renovate[bot]	57ca095df0	Update dependency prek to v0.4.11	2026-07-25 07:30:18 +03:00
renovate[bot]	4b5cc24513	Update Rust crate base64 to 0.23.*	2026-07-23 20:59:41 +03:00
renovate[bot]	53daa06151	Update docker.io/ollama/ollama Docker tag to v0.32.3	2026-07-23 20:59:25 +03:00
renovate[bot]	77103e2523	Update ghcr.io/element-hq/synapse Docker tag to v1.157.1	2026-07-22 21:11:02 +03:00
renovate[bot]	0a755d287e	Update docker.io/ollama/ollama Docker tag to v0.32.2	2026-07-22 09:57:30 +03:00
renovate[bot]	fe3296594b	Update ghcr.io/element-hq/element-web Docker tag to v1.12.24	2026-07-22 06:46:43 +03:00
renovate[bot]	1e7f557334	Update ghcr.io/element-hq/synapse Docker tag to v1.157.0	2026-07-22 06:46:26 +03:00
renovate[bot]	be09ccf5da	Update Rust crate tokio to v1.53.1	2026-07-21 07:18:42 +03:00
renovate[bot]	fa3646774a	Update Rust crate serde_json to v1.0.151	2026-07-20 12:12:56 +03:00
renovate[bot]	1774bf29eb	Update Rust crate serde to v1.0.229	2026-07-19 06:13:19 +03:00
renovate[bot]	2da4e6793a	Update Rust crate anyhow to v1.0.104	2026-07-19 06:13:04 +03:00
renovate[bot]	166c1f7659	Update Rust crate tokio to 1.53.*	2026-07-17 15:32:13 +03:00
renovate[bot]	0f0868b795	Update docker.io/rust Docker tag to v1.97.1	2026-07-17 05:31:35 +03:00
renovate[bot]	65d24e4681	Update Rust to v1.97.1	2026-07-16 17:55:44 +03:00
renovate[bot]	ec83b38a1a	Update Rust crate tokio to v1.52.4	2026-07-16 17:55:33 +03:00
renovate[bot]	ea13dd42d7	Update docker.io/ollama/ollama Docker tag to v0.32.1	2026-07-16 14:28:35 +03:00
renovate[bot]	b405859db7	Update dependency prek to v0.4.10	2026-07-16 14:28:19 +03:00
renovate[bot]	23a09cdf60	Update Rust crate regex to v1.13.1	2026-07-16 08:12:47 +03:00
renovate[bot]	dd13deff33	Update docker.io/ollama/ollama Docker tag to v0.32.0	2026-07-14 07:06:35 +03:00
renovate[bot]	0c109d4f92	Update forgejo.ellis.link/continuwuation/continuwuity Docker tag to v26.6.2	2026-07-13 07:17:51 +03:00
Slavi Pantaleev	e346951395	Switch continuwuity env vars to CONTINUWUITY_ prefix The CONDUWUIT_ prefix still works in v26.6.1, but is a legacy compatibility name from before the conduwuit -> continuwuity rebrand. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-12 13:59:26 +03:00
renovate[bot]	eee3c05e86	Update forgejo.ellis.link/continuwuation/continuwuity Docker tag to v26 (#213 ) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>	2026-07-12 13:58:12 +03:00
renovate[bot]	4bf44665a5	Update dependency prek to v0.4.9	2026-07-11 21:34:08 +03:00
renovate[bot]	eae0851328	Update docker.io/rust Docker tag to v1.97.0	2026-07-10 07:17:52 +03:00
Slavi Pantaleev	5212d6643e	Update Rust to v1.97.0 Fixes new clippy lint (redundant reference in format! argument) and reflows the affected format! calls per rustfmt. Supersedes https://github.com/etkecc/baibot/pull/211 Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-09 20:49:43 +03:00
Slavi Pantaleev	b4a070f536	Update regex to 1.13.* and mxidwc to 1.0.3 Supersedes https://github.com/etkecc/baibot/pull/210 Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>	2026-07-09 20:46:08 +03:00
renovate[bot]	de2b24f91b	Update docker.io/ollama/ollama Docker tag to v0.31.2	2026-07-08 21:28:24 +03:00
renovate[bot]	fbe956c0b7	Update ghcr.io/element-hq/element-web Docker tag to v1.12.23	2026-07-07 22:00:31 +03:00
renovate[bot]	a64b7da7ae	Update ghcr.io/element-hq/synapse Docker tag to v1.156.0	2026-07-07 22:00:22 +03:00
renovate[bot]	ac5e776345	Update dependency prek to v0.4.8	2026-07-04 17:17:33 +03:00
renovate[bot]	bea27df2e0	Update dependency prek to v0.4.6 (#203 )	2026-07-01 08:05:03 +03:00
renovate[bot]	b7c1b6f48f	Update docker.io/rust Docker tag to v1.96.1	2026-07-01 07:18:07 +03:00
renovate[bot]	8a5a38f241	Update Rust to v1.96.1	2026-07-01 07:05:55 +03:00
renovate[bot]	5306d3bb8c	Update docker.io/ollama/ollama Docker tag to v0.31.1	2026-07-01 07:05:40 +03:00
renovate[bot]	75631982e7	Update docker.io/ollama/ollama Docker tag to v0.31.0	2026-06-30 08:57:43 +03:00
Slavi Pantaleev	6058bf733b	Adjust changelog entry date	2026-06-29 17:10:30 +03:00
Aine	a445933c0b	Provider-neutral context management	2026-06-29 17:10:04 +03:00